Tapered Wood Plugs
Port Orford Cedar is one of the rarest and most prized native cedars of the Pacific Northwest — fine straight grain, naturally aromatic, and a pale yellow tone that finishes beautifully. It's used in high end boat building, archery equipment, and specialty woodworking applications where straight grain and natural properties matter.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Port Orford Cedar's fine grain and light color require careful selection — I'm looking for the most consistent grain pattern and cleanest tone across the face.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Port Orford Cedar Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Douglas Fir is the structural backbone of Pacific Northwest construction — strong, straight-grained, and that warm reddish-brown tone that finish carpenters and craftsman woodworkers have worked with for generations. It's the species in the floors, the trim, and the framing of countless homes across the region.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Douglas Fir's tight grain and consistent color make it one of the more predictable species to work with — I'm looking for boards with the cleanest grain pattern and most consistent reddish-brown tone.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Douglas Fir Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Eastern Red Cedar is the aromatic cedar — the species used in hope chests, closet linings, and anywhere the natural moth-repelling oils matter as much as the wood itself. It's a warmer, redder tone than Western Red Cedar with a more pronounced figure and that distinctive cedar scent that tells you immediately what you're working with.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Eastern Red Cedar's natural figure means color and grain can vary considerably — I'm looking for consistent color and tight grain that gives you a predictable result across an entire pack.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Eastern Red Cedar Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Western Red Cedar is the Pacific Northwest's signature wood — naturally resistant to moisture, rot, and insects, with a warm reddish tone and straight grain that weathers beautifully in exterior applications. It's the species deck builders, fence contractors, and boat builders reach for when the project needs to last.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Western Red Cedar varies considerably in grain density and color — I'm looking for consistent tight grain and clean color that gives you a predictable result across an entire pack.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Western Red Cedar Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Straight Wood Plugs
Eastern Red Cedar is the aromatic cedar — the species used in hope chests, closet linings, and anywhere the natural moth-repelling oils matter as much as the wood itself. It's a warmer, redder tone than Western Red Cedar with a more pronounced figure and that distinctive cedar scent that tells you immediately what you're working with.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Eastern Red Cedar's natural figure means color and grain can vary considerably — I'm looking for consistent color and tight grain that gives you a predictable result across an entire pack.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Eastern Red Cedar Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Western Red Cedar is the Pacific Northwest's signature wood — naturally resistant to moisture, rot, and insects, with a warm reddish tone and straight grain that weathers beautifully in exterior applications. It's the species deck builders, fence contractors, and boat builders reach for when the project needs to last.
These are face grain plugs, milled so the grain runs across the top of the plug the same way it runs through your surrounding material. The result is a flush installation that disappears into the wood rather than announcing itself.
I hand select every board before it gets cut. Western Red Cedar varies considerably in grain density and color — I'm looking for consistent tight grain and clean color that gives you a predictable result across an entire pack.
Available in 9 sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1"
Pack quantities: 10, 25, 50, 100, 250, 500, 1,000, 2,500
Also available in metric sizing — see my Western Red Cedar Metric Wood Plugs listing.
Select your size and quantity above. If you need something outside what's listed or have a large contractor order — just send a message.
Builds
Fences, decks, pergolas, and custom requests. I build new outdoor wood projects in the Portland metro area.
Restorations
Restoration work is balancing what can and should be done. To recognize what the work’s original intent was and breathe new life into it.
Shop
I make hand crafted wood products available through Etsy. You can browse my shop through the link below or on Etsy.
Request an Estimate
If you have a project that’s unusual or custom, I’d be happy to give you a consultation, estimate, and schedule a time to do the work. Send a message through the link below.

